INTRODUCTION
Like the bag filter, the Cartridge dust collector is also a device used to collect and filter industrial dust. Because the surface area of the unit filter cartridge is larger than the filter bag, the filter air volume of the unit filter cartridge dust collector is very large. In the case of relatively low dust concentration, the filter cartridge pulse jet dust collector is more cost-effective.
Main product parameters
Air volume of dusty gas: up to 200,000m3/h
Filter area: up to 3600 m2
Suitable dust air temperature: up to 130 degree
Dust concentration in output: up to 3mg / m3 ( due to the dust collector setting)
ADVANTAGES
1. Since the filter material is used in a fold cylindrical shape, the density of the filter material is large. Therefore, compared with the bag filter, the volume of the filter cartridge filter with the same air volume is much smaller;
2. Due to the limitation of the machine width of the folded filter material, the maximum length of the filter cartridge is 2400mm, which cannot be made 6 meters long or 8 meters long like a cloth bag. The corresponding features are easy installation and small maintenance workload;
3. Dust accumulation in the folded slits of the filter cartridge will make it difficult to clean the dust. Therefore, it is not recommended to customize a filter cartridge that is too tightly folded. Although this can reduce the manufacturing cost, when the dust accumulates in the crease, the resistance of the dust collector will increase, the suction force will decrease, and it will fail.
4. The advantages of the filter cartridge dust collector can be placed indoors to deal with larger air volume.
INSIDE
In pulse jet dust collector, the filter cartridge can be arranged vertically, inclined or horizontally. Due to the effect of gravity, vertically arranged filter cartridges perform best when pulsed to remove dust from the surface of the filter cartridge. One side of the flower plate is the filter room, and the other side is the air box pulse blowing room, also called the clean air room.
SPECIFICATION
Contact Us
PORTABLE WELDING FUME EXTRACTOR / COLLECTOR
Because the welding work often involves heavy steel equipment, which is not easy to move, this equipment can be pushed to the vicinity for dust removal operations according to the location of the welding worker. The suction arm of the welding fume precipitator can be 2 meters long or can be extended to 3 meters long.
SPECIFICATION
