INTRODUCTION
Mobile welding fume extractor has two directional and two rotary polyurethane casters with brake device for easy moving and stationing.
It is suitable for the purification of fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material.
The filter cartridge of the welding fume extractor is made of imported filtering material of high filtration precision and can filter out welding fume of 0.5μm. According to the extractor’s work intensity and the amount of dusts, the usage life of the filter cartridge is different.
Main product parameters
Air volume of dusty gas: up to 8,000m3/h
Filter area: up to 48 m2
Suitable dust air temperature: up to 100 degree
Dust concentration in output: up to 5mg / m3 ( due to the dust collector setting)
OPERATION
Through centrifugal fan, the welding smoke come into exhaust inlet.
The universal dust hood sets the flame arrester. The spark will be blocked by flame arrester.
Smoke gas into the sedimentation chamber, The coarse dust fall directly to ash hopper, fine dust particles by filter capture outer surface, clean gas go to the clean room after filter filtration purification.
Clean air filter and the activated carbon adsorption further after purification and then outlet discharge.
DETAILS
Welding fume extractor control panel in English
The suction arm hood with dam-board
The centrifugal fan with power system
Power Interface
Centrifugal Fan air outlet
Pulse jet blowing system
ADVANTAGE
1. A special imported ABB turbo fan and motor, use prevent motor burn out against overload circuits, high safety, stable work performance.
2. USES the built-in PLC centralized control mode, simple structure, easy operation.
3. Pulse type automatic dust discharge: adopts the comprehensive automatic rotating counter blowing ash removal, further thoroughly, clean filter surface dust. It can always keep dust collector constant air volume absorption. At the bottom of the air compressor parts, it has high pressure hose connection. It can guarantee the purifier always in good working condition. (According to user requirements , we can design it as automatic or manual control)
4. Filter cartridge adopts the imported materials, Long service life. It can absorb dust particles, 0.3 microns. It is good filtering effect for wet and sticky dust.
5. The optional activity of universal arm can be move 360 degrees. It can suck the flue gas from the flue gas occurs, greatly improving the rate of dust collection, protect the health of workers.
6. Purifier internal against fire hazards and slag adopted three big grain protective measures, make the service life of the purifier is longer, more safe and reliable.
INSIDE
Because the welding work often involves heavy steel equipment, which is not easy to move, this equipment can be pushed to the vicinity for dust removal operations according to the location of the welding worker. The suction arm of the welding fume precipitator can be 2 meters long or can be extended to 3 meters long.
SPECIFICATION
Contact Us
GRINDING TABLE
During grinding/polishing, the tool will cause a lot of metal dust, fiber dust, paint dust, etc. The dust is very light and large amount, pollute the working environment, cause lungs problems to workers and bring large loose for the manufacturer.
Grinding and Polishing downdraft extractor is a specialized fume extractor unit that uses workbench to collect fume. This system can suck fume from top side, bottom side, back side, left/right side.Accept customization.The solution safely and efficiently collects particles from applications such as grinding, sanding, metal/material cutting, and polishing.
SPECIFICATION
